Measuring your current bike


We can fit your new bike according to the measurements of your current bike.
 
This is a good idea if you want to copy your current setup or perhaps tweak your current settings to make them perfect.
 
 

These are the measurement values you can send to us along with your order. Enter them in the comment box at checkout.


Saddle height  
 

Measure from the centre of the bottom bracket and along the seat tube to the top of the saddle.


To the STI levers  
 

Measure from the front of the saddle to the front of the levers perpendicularly to the top. Please also specify the saddle dimensions: Length, width as well as the make and model.


Handlebar width  
 

Measure from the top of the handlebar from the center of the tube to the center of the tube – D1.

Note: If the handlebar is flared – i.e. is wider at the bottom than at the top, please measure the handlebar width – D2 – as well.


Set-back
 

Measure from the vertical line that runs from the centre of the bottom bracket to the front of the saddle.

Note: You can also place the bike perpendicularly from a wall with the rear wheel against the wall and measure the distance from the wall to the front of the saddle (A) and the middle of the bottom bracket (B) and subtract these values (E).

B-A = E

Drop / handlebar height

The drop measurement represents the distance between the top of the saddle and the top of the handlebars.

Shop Pronghorn bikes

Pronghorn shortcuts